MT-20/purple

Coloured magnetic tape 20 mm

for labelling and cutting, rolls of 1 m, purple
promptly deliverable

Description

This colourful magnetic tape is 20 mm wide and available in many different colours. It consists of strontium ferrite, the front is laminated with light-resistant PVC. You can cut it to size with household scissors and label it with pencil, pen or whiteboard marker. The writing can be removed with alcohol, benzine or eraser, but some marks may remain. A waterproof felt tip marker is best suited for writing a permanent label on magnetic tape. You can find detailed information in our FAQ labelling. You can also print on magnetic tape using digital or screen-printing techniques. Please read our tips for printing on magnetic tapes.

The writable magnetic tape will be delivered in rolls of 1 metre each. If you order 3 metres in yellow, for instance, you will receive three rolls of 1 metre each.
Read about more features and tips

Technical data

Article ID MT-20/purple
EAN 7640155435079
Colour Purple
Length 1 m
Width 20 mm
Thickness 1 mm
Magnetisation Anisotropic
Strength 80 g/cm²
Weight 74 g/m

Additional features and tips


Click to enlarge
The magnetic tapes are available in many different colours. They are anisotropically magnetised, which increases the adhesive force.

Click to enlarge
The flux detector beautifully visualises the lamellar magnetisation. North and south poles alternate closely spaced. That leads to a higher adhesive force at direct contact with ferromagnetic surfaces.
Magnetic tapes are suitable for all sorts of labeling: By hand...
... with printed labels...
... or without writing, just as a colour code.
Fancy frame: Magnetic tapes can also add a stylistic note. On the top left the MT-20 was used, on the right the Coloured magnetic tape 10 mm and below the Coloured magnetic tape 40 mm.

However, that works only with paper or thin cardboard, because magnetic tapes are not designed for this type of use; they need direct contact with a ferromagnetic surface.
Magnetic tapes are not a suitable surface for magnets. They would demagnetise the tapes. A better surface for magnets would be our magnetic_strips.