MT-10

Coloured magnetic tape 10 mm

for labelling and cutting, rolls of 1 m
promptly deliverable

Please select your desired model.

Description

This magnetic tape is 10 mm wide and available in many different colours. It consists of strontium ferrite, the front side is laminated with light-resistant PVC. It can easily be cut to the desired length with standard scissors and labelled with pencil, pen or waterproof marker. You can remove most of the writing with alcohol, petrol or eraser, but marks might remain. You can find more detailed information in our FAQ labelling. You can also print on a magnetic tape via digital or screen printing. Please read our tips for printing on magnetic tapes.

The magnetic tape will be delivered in strips of 1 m. If you order 3 m in red, for instance, you'll receive three rolls of 1 m.
Read about more features and tips

Technical data

Article ID MT-10
Length 1 m
Width 10 mm
Thickness 1 mm
Magnetisation Anisotropic
Strength 80 g/cm²
Weight 37 g/m

Additional features and tips


Click to enlarge
Magnetic tapes are available in many different colours. They are anisotropically magnetised, which gives them a higher adhesive force than standard magnetic tapes.

Click to enlarge
The flux detector beautifully visualises the lamellar magnetisation. North and south poles alternate closely spaced. That leads to a higher adhesive force at direct contact with ferromagnetic surfaces.
Coloured magnetic tapes are suitable for all sorts of labeling: For instance, for work scheduling on the whiteboard.
Or attach impressive colourful labels to the storage shelves.
Or use colourful magnetic tape without writing, just as a colour-coded identification.
Fancy frame: Magnetic tapes can also add a stylistic note. On the top left the Coloured magnetic tape 20 mm was used, on the right the MT-10 and below the Coloured magnetic tape 40 mm.

However, that works only with paper or thin cardboard, because magnetic tapes are not designed for this type of use; they need direct contact with a ferromagnetic surface.
Magnetic tapes are not a suitable surface for magnets. They would demagnetise the tapes. A better surface for magnets would be our magnetic_strips.